---Welcome to J.T.E. Co.,Ltd.---

AViTEQ-small-scale conveying equipment is used everywhere fine-grained bulk materials and not too unwieldy mass parts must be delivered, conveyed, dosed, added or assigned from storage tanks. AViTEQ has led the way in producing these devices and drives in Europe for more than 50 years. They are employed in many branches of industry, e.g. in the chemical and plastics industry, the feedstuffs industry, industrial stones and earth, installation and handling technology, the food and luxury goods industry, the paper industry, as well as in sugar works, refineries and foundries,

Brochure.pdf

Advantages of the AViTEQ small conveying equipment:

Operationally safe in continuous employment
High level of conveying capacity with compact dimensions
Synchronized two-mass vibration system
Wear-free, without rotating parts
No influencing of the conveying speed with different loading of the user device (conduit, trough, rail).
Maintenance-free drive
Conformity with all EC Guidelines which affect the drives
Also available for explosion-endangered spaces (ATEX; 94/9/EG), as well as for 60 Hz power systems and other mains voltages

Structure and operating mode

Small-scale conveyor equipment is based on synchronized two-mass vibration systems which are tuned close to resonant condition. The drive part includes the elements for vibration generation, such as electromagnet and leaf spring packages. The vibration amplitude (double amplitude) defines the maximum height of the microthrow and thus the theoretically possible conveying speed. The actual flow rate with bulk material conveying is basically influenced by the conveying cross section, the settled-material density and the conveyability of the bulk material. The small conveying drive is connected with the working device, such as conduit, trough or rail, such that it is easily detachable. Optimal layout design and coordination of the two-mass vibration system guarantee conveying characteristics which are uniform and independent of the working device loading. The small conveying drive is supported on rubber dampers. Vibrations are thus hardly transmitted to the environment.

Notes for the employment of construction-site finished working devices:

The bending and torsion-resistant design of the working device is a prerequisite for trouble-free functioning of small-scale conveyor equipment. In case of construction it is thus to be absolutely ensured that thin plates and low side panel heights (trough) corner edges or other bracings are provided in the case of large plate field dimensions.
In case of exceeding the maximum value for the effective weight, the vibration amplitude of the drive must be reduced!

Drive	Nutz- gewicht (kg)		Schwing- zahl/Min. am 50 Hz-Netz	Hauptmaße LxBxH (mm)	Antriebs- gewicht (kg)
Drive	Serie	max.	Schwing- zahl/Min. am 50 Hz-Netz	Hauptmaße LxBxH (mm)	Antriebs- gewicht (kg)
KF 0,3	0,3	0,5	6000	160x35x65	1,5
KF 0,5	0,5	0,8	6000	210x50x85	2,8
KF 0,7	1,5	2,7	6000	320x75x110	10,0
KF 0,9	3,0	5,5	3000	375x100x140	18,0
KF 1	1,5	3,5	6000	305x123x107	8,0
KF 6	3,0	7,0	3000	425x163x145	20,0
KF 12	6,0	20,60	3000	515x203x164	33,0
KR-2	0,8	1,5	3000	200x106x78	3,8

With reference to the respective area of application, the product range includes 4 groups:

The group (Type KR-2; KF 1; KF 6; KF 12) is particularly suitable for the discharge and conveying of bulk material, e.g. for the addition of components in mixing installations. The small conveying drive is provided with a corresponding trough or pipe for this purpose.
The Types eKF 1, eKF 6 and eKF 12 are examined vibration feeder drives for use in potentially explosive atmospheres certificated accordingly to ATEX-Directive 94/9/EG.
The group (Type KF 0,3; KF 0,5; KF 0,7; KF 0,9) serves mainly as a drive of rails for the conveying of arranged parts, e.g. as transport or backed-up route sections between parts conveyor and downstream equipment and/or machine. In this case, a conveying rail is used on the small conveying drive, which is adapted exactly to the part to be transported.
A variant of the group KF 0,3 to KF 0,9 is the "CR" design implementation e.g. for employment in the food or pharmaceuticals industry. These small conveying drives do not have any painted parts, they are easy to clean, resistant to ultraviolet light, alcohol and formalin, as well as suitable for the sterile sector. They are thus also provided with a trough or pipe for the conveying of bulk material.

Standard working devices (length/width/height in mm) are available from storage.

Design:

Trough of stainless steel 1.4301, electrochemically polished, open design implementation, rectangular conveying cross-section, free run-out in front.

KF 0,5	KF 0,7	KF 0,9	KF 1	KF 6	KF 12	KR-2
275/50/40	400/100/60	500/100/60	400/50/40	500/100/60	630/200/100	275/50/40
350/13/15	630/50/40	700/150/60	400/100/60	500/150/60	630/300/100	350/13/15
400/50/40		800/100/60	450/50/40	500/200/60	630/400/100	400/50/40
			500/50/40	550/100/60	800/200/100
			500/100/60	630/100/60	800/300/125
			600/50/40	630/200/60	800/400/150
				700/150/60	1000/200/100
				800/100/60	1100/300/100
				850/150/60
				1000/100/60
				1000/150/60

Accessories:

Appropriate standard storage containers of stainless steel are available for different small-scale conveyor equipment. The filling volume (9/25/50 liter) and the diameter of the run-out nozzles (mm 43/90/159) are assigned to the small-scale conveyor equipment according to the width of the respective standard trough. By means of height adjustment of the container, the layer thickness and thus the flow rate can be easily changed, while maintaining the same conveying speed.