Features of the GV Drummotors

• Fully Enclosed, non-ventilated industrial conveyor-belt drive.
• Simple, solid construction.
• Gearbox and Electric Motor housed in an oil bath for lubrication and heat conduction.
• Drum End-Caps fitted with Viton Oil seals with Dust lips. Seals run on hardened Stainless Steel Bushes and are protected from damage by means of an additional metal seal.
• Insides of the Drum Motor designed so that both squared mounting Shafts are rigidly connected, thus transferring the reaction torque to both sides of the Conveyor Frame.
• Drum End-Caps fastened to the Shell with strong bolts enabling easy disassembly.
• Gears manufactured from alloyed casehardened steel ground and/or honed to a high quality finish ensuring low noise levels and longevity.
• Ball and needle Bearings installed with a high Factor of safety.
• Power supplied direct to the Stator (standard insulation class ’F’) without the use of slip rings or brushes.
• Surface area of Shell machined convex to assist belt tracking.
• Oil level can be checked/changed without removing Drum from the Conveyor Frame.
• Drum Motors supplied as standard with a Terminal Box that can be turned 90º CW or ACW for positioning of the Cable entry.
• All Drum Motors supplied as Standard IEC norm. Sealed to minimum IP 66.
• CSA approved Drum Motors can be supplied upon request.
• Backstop (anti run back) or Electromechanical Brakes can be fitted.
• Drum Motors can be supplied in Stainless Steel (AISI 316L. workpiece no. 1.4404)
• All Motors are CE marked.